Products

POWER STATION

Ø Input 220 volts single phase 50 or 60 Hz

Ø Adjustable output from 0 to 100 volts, with display of voltage

Ø Direct current rectified by silicon diodes. Ammeter with 2 ranges 0 to 10 and 0 to 20 Amp

Ø 5 pushbuttons for function selection

Ø 2 timers, polishing and etching

Ø Rear output to electrolysis unit and front connector for work with special clamp-type holder

Ø Time delays for starting and electrolyte flow control.

ELECTROLYSIS UNIT

Ø PVC base, with rack and pinion system, crank driven vertical movement

Ø Moving assembly in PVC with circulation pump and electric motor

Ø Motor with variable speed to adjust the electrolyte flow

Ø Stainless steel cooling coil

Ø 5 PVC covers with openings of different shapes and sizes

Ø Revolving plastic-coated stainless steel rod as current feeder

Ø 2 litre glass beaker.

Ø   The Power Station, with adjustable output voltage between 0 and 100 V, supplies a rectified current of 0 to 10 Amps or 0 to 20 Amps for time periods set between 0 and 99 seconds.
Ø   The Electrolysis Unit is designed to withstand both mechanical shock and corrosion. It includes a body that forms a base for the moving assembly and the electrolyte reservoir, he moving assembly with a pump and a motor, a cooling coil and an electrolysis chamber equipped with electrodes.
Ø   A DC current produces the anodic dissolution of the surface of the metal specimen inside the electrolysis chamber. A flat, polished surface is obtained in just seconds, ready for observation under a microscope.

POLISEC C 25（Electrolytic Polishing）

Power station

Ø width: 440 mm

Ø depth: 305 mm

Ø height: 133 mm

Ø weight: 17,5 kg

Electrolysis unit

Ø Width: 200 mm

Ø Depth: 400 mm

Ø Height: 350 mm

Ø Weight: 17.5 kg